山东三石生产的吊车自制吊型号欢迎来电质询

使用微信扫描二维码分享朋友圈，成交更快更简单！

1.2吨唐骏随车吊
型号 ZQ1S4
排放标准 国五
大起重量 1200kg
吊臂节数 1.3米*4节
吊臂 带载伸缩
大起升高度 5m
大起重力矩 1.56T*M
液压系统额定流量 25L/min
大工作幅度 4m
回转角度 ±180
变幅角度 -65°~~75°
起重机自重 500kg
底盘 唐骏（选配）
济宁车载吊机使用说明
1. 避免超载。
2.根据地面条件判定是否允许使用。
3.正确装载货物。
4.操作时请穿戴好安全鞋和手套。
5.每次使用前请做一次的操作检查。
6.试车前，平衡梁和吊臂的调节拉杆应充分预紧。
7.不得沿主梁方向斜吊物品。
8.吊机旋转时应注意到电机的电缆长度，不允许连续同方向旋转，防止电缆扯断。
1.2吨折臂随车吊 可带载伸缩的1.2吨小型随车吊
1.2 ton tang jun crane

Model ZQ1S4

Emission standards of country 5

The maximum lifting weight is 1200kg

The number of boom sections is 1.3m *4

Boom belt load expansion

Maximum lifting height 5m

Maximum lifting torque 1.56T*M

Rated flow of hydraulic system is 25L/min

The maximum working range is 4m

Rotation Angle 180

Luffing Angle - 65 ° ~ 75 °

The crane has a dead weight of 500kg

Chassis tang jun (optional)

Instructions for use of car crane

Avoid overload.

2. Determine whether it is allowed to use according to the ground conditions.

3. Load the goods correctly.

4. Please wear safety shoes and gloves when operating.

5. Please make a thorough operation check before each use.

6. Before the test, the adjusting rod of the balance beam and the lifting arm should be fully pre-tightened.

7. Items shall not be slanted along the direction of the main beam.

8. The cable length of the motor shall be noted when the crane rotates. Continuous rotation in the same direction is not allowed to prevent the cable from being torn.

1.2t folding boom truck crane is a small 1.2t truck crane with telescopic load