广西PC650犁头改装

使用微信扫描二维码分享朋友圈，成交更快更简单！

广西PC650犁头改装

挖掘机岩石臂与传统挖掘机臂的制作不同，传统挖掘机的大小臂工作装置因为臂整体向前伸进挖掘工作，所以大小臂都需要减轻重量，大小臂是以箱体的形式设计。但此款岩石臂因为需要向前掘进岩石所以需要加重大小臂的重量，在其箱体内加入了铁块，水泥等，主要作业地质为风化石，所以名叫岩石臂或者缩短臂，因为外形很类似老鹰的嘴巴，所以也叫鹰嘴臂。
由于一些地质比较硬，因此岩石臂在相同马力时，小臂越短，它的力量就越大。所以，有人在买挖掘机时会要求小臂缩短。这样干活更有劲。一般根据客户需要而量身定做的.

举例：

类似CAT345挖掘机岩石臂大臂总长5.3米，小臂总长3.4米，总重量达14T左右，是开挖风化石的好工具，目前西北地区开挖风化石多用此类产品，相比传统的爆破作业而言作业，成本低，环境污染少。

适用范围:

定做机型如PC400-7、PC450-8、PC1100，CAT345B、CAT349、CAT365、ZX450,ZX470、ZX870,DH500、SK450、SK480等大型挖掘机定做岩石型大小臂,配松土器,专攻风化石、页岩、及各种岩斗,改装岩石臂中大小臂箱体里面全部装铁沙与水泥, 结构性更强, 使用工作更有效率, 改装好的岩石臂整体重量可以达到17吨位, 开山攻岩轻而易举.

技术支持：

挖掘机岩石臂产品采用的计算机2D、3D辅助设计系统设计，并经过设计系统进行挖掘机实际动作模拟，确保了产品的准确性及可靠性，设计工程师通过实际应用知识和经验，从应力分析、材质选择、技术和工艺、设计制作等方面了产品的结构强度、使用性能和质量，臂内安装有内部缓冲板以承受张力负载，，延长了挖掘机标准臂、挖掘机加长臂、岩石臂的使用寿命。

挖掘机岩石臂特征：

1，不改变原有挖掘机的使用性能及使用寿命
2，采用高强度钢板精心制作
3，提高作业范围
4，将挖掘机的工作效率发挥到
5，可根据客户机型和要求，设计订做
6，可使用挖机原配的油缸、销轴、油管等配件（减少客户成本）
Description:

Rock excavator arm excavator arm with traditional produce different size arm excavator working device because the traditional forward into his arms the whole excavation work, the size of the arm will need to reduce the weight, size, arm in the form of cabinet design. But because the need to move the arm section of rock excavation of rock so you need heavier weight size arm in its cabinets added iron, cement and other major operating wind geological fossils, so called rock arm or shorten the arm, because the shape is very Similar eagle's mouth, also called olecranon arm.
Since some geological relatively hard, so rock arm at the same horsepower, the shorter arm, the greater its power. So, when someone asks to buy excavator arm shortened. Such work more energetically. Generally tailored according to customer needs.

Example:

Similar CAT345 excavator rock arm length of 5.3 m boom, arm length of 3.4 meters, with a total weight of up to about 14T, is a good tool for wind fossil excavation, the current Northwest winds fossil excavation multi such products, compared to traditional blast job in terms of high efficiency, low cost and less environmental pollution.

Scope:

Custom models such as PC400-7, PC450-8, PC1100, CAT345B, CAT349, CAT365, ZX450, ZX470, ZX870, DH500, SK450, SK480 excavators and other large custom-size rock type arm, with ripper, specializing in wind fossils, page rock, and various rock bucket, arm in arm size modification rocks all packed inside the box iron sand and cement, more structured, more efficient use of the work, refit good rock arm can reach 17 overall weight tonnage, mountains rock attack easy.

Technical support:

Rock excavator arm of products using advanced computer 2D, 3D-aided design system design, and through practical action designed to simulate the excavator system to ensure the accuracy and reliability of the product, the design engineer through the practical application of knowledge and experience from the stress analysis , aspects of material selection, technical and technological, design and other products to ensure the structural strength, performance and quality, the arm is mounted inside the bumper to withstand tension loads, durable, extending the standard excavator arm excavator long arm , the life of the rock arm.

Rock excavator arm features:

1, does not change the performance and service life of the original excavators
2, the use of high-strength steel elaborate
3, which greatly improve the operating range
4, will work to maximize the efficiency of the excavator
5, according to customer requirements models and design customized
6, can be used digging machine wife cylinder, pin, tubing and other accessories (reducing customer costs)